ArticlesPlanet.net
most popular articles top authors	about us contact us

Turn Your Sunglasses Into a Hidden Spy Camera!

It is true. Even if you are not an expert in electronics, you can turn your run-of-the-mill sunglasses into a hidden spy camera! And all for a very low cost, with minimum effort and knowledge on your part, and with just a few basic tools and parts. Here is how.

Things You will Need

You will need black sunglasses, preferably the type that wraps around your eyes and can accommodate a mini camera on its side. The darker the sunglasses, the better to conceal the hidden spy camera.

You will also need a mini spy camera, which you can get online or from auction houses. If possible, secure a mini spy camera with color capabilities and audio-recording capacities. This way, you will have higher quality video and audio footages.

You also have to look for a mini camcorder for recording the video and audio footages. Opt for a gadget that fits easily into your pocket. With some types of camcorders, you might have to use cargo pants for its wide pockets.

You also need to buy 24-gauge black wire to extend the wires on the hidden spy camera. Also purchase a 9-volt battery for its power source.

The tools necessary for this type of do-it-yourself project are your trusty wire snips for cutting wires, your soldering gun to solder wires, shrink tubing to protect the wire connections, and a hot glue gun to attach the spy camera to the sunglasses. If you have all these and a little patience, then you are set to make your very own homemade hidden spy camera.

Modify the Mini Spy Camera

First, expose the separate wiring in the camera by peeling off the protective one-wire casing. Using your wire snips, trim the exposed wires on the spy camera to about 3-4 inches from the camera itself. You should see 4 exposed wires - power, audio, video, and ground. All these should converge into three connectors only - power, audio and video - since the ground wire is connected to all three.

Get your black wire and cut four lengths of about 4 feet. Using your soldering gun, you will then solder each length into the exposed spy camera wires. After this, you have to add heat shrink tubing to protect the new connections. You will then put finishing touches on your ready-to-be-mounted hidden spy camera by soldering the other wire ends to the appropriate connector end. You can apply more shrink tubing as necessary to produce an all-black wire, which will blend with your black sunglasses.

After thoroughly cleaning the sunglasses, you can then mount your modified mini spy camera on the sunglasses' arm. Choose the side which fits you more comfortably.

You then connect the audio and video wires of the mini spy camera to your camcorder. Add the 9 volt battery to the power line and you are set to go. Just hide the wires inside your shirt and on to your pants pocket.

Enjoy! You can now shoot video and audio footages with your homemade hidden spy camera! Imagine the endless possibilities of this gadget. Just be very careful as laws and ethics can be very different from your own purpose.

Article Source: http://www.articlesplanet.net

About Author:
Do you want a hidden spy cam and yet be fashionable still? Then turn your mini spy camera and your sunglasses into a fashionable hidden spy camera! Go to Video-Surveillance-Guide.com for more information on how you can achieve this.